Linear GRD One Channel Gate Receiver Start Price USD 35.00 Current Price USD 35.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Monday, November 03, 2008 End Time Wednesday, December 03, 2008 Location Wichita, Kansas See more about 'Linear GRD One Channel Gate Receiver' Description Doorman's Door & Opener Store The GRD has a single relay. It replaces two different Linear gate receivers, the DRG and the DRG-LV. The GRD is a digital receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD2 will operate two gates, one gate and an obstacle sensor or channel one can open the gate and channel two can close the gate. All of the Delta-3 transmitters, including the two and four-channel transmitters, are compatible with the GRD. The Delta-3 radio format provides 256 different digital codes. The codes are set using the 8-position coding switches 310 MHz frequency in the units. In order to avoid the possibility of duplicating codes in adjacent systems, factory set codes should not be used. The receivers can operate from 16-24 volts AC or 20-30 volts DC and are normally powered from the gate operator. The relay contact(s) are rated at 5 amps @ 32 volts AC/DC NEC Class 2 circuit. The GRD has a "F" connector for attaching an antenna. The receiver is supplied with a 9-inch local antenna, a three foot 75 ohm coaxial cable, and a bulkhead connector for mounting the antenna outside the gate operator enclosure. Features: For use with any Delta 3 transmitter Activates one gate operator for access control F-connector, antenna, coaxial cable supplied 12 and 24 Volt models Same as DRG (DNR00084) and DRG-LV Current product model number DNR00102   Please EMAIL ME THROUGH EBAY WITH ANY QUESTIONS!! Be sure to add me to your favorites list! On Dec-07-07 at 11:06:38 PST, seller added the following information: doorman26 store Place a Bid!