Xantrex DR 1524 Inverter Charger Start Price USD 800.00 Current Price USD 800.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, July 23, 2008 End Time Wednesday, July 30, 2008 Location Miami, Florida See more about 'Xantrex DR 1524 Inverter Charger' Description This is a listing for a Xantrex DR 1524 inverter charger1500 Watts24 voltsDescriptionThe DR Inverter/Charger provides dependable modified sine wave power for businesses, homes and workshops.It can power most common electrical appliances such as lights, televisions, cash registers, refrigerators, washing machines, computers, and power tools.  The DR’s high surge capacity gives it the ability to start difficult motor loads. Once set up, all functions of the inverter/charger are fully automatic. Features Quiet, high efficiency operationFront panel LED indicators and adjustable switch selectorsSelectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteriesThree-stage battery charging (bulk, absorption, and float) for increased performanceLow battery, overload, and high battery, over temperature protection circuitryFast switching (grid to battery and battery to grid) for backup powerLow idle current (less than one watt) conserves energy when no loads are presentGenerator compatible DR1524   Electrical Specifications   AC Input Voltage   120 VAC   AC Input Low Transfer Voltage   40-105 VAC   AC Input Current   55 amps AC - 30 amps AC pass through and 25 amps AC charging   Continuous Power (@ 25 °C)   1500 VA   Efficiency (peak)   94%   Output Voltage (RMS)   120 VAC   Maximum Output Voltage Regulation   +/- 5%   Frequency (nominal)   60 Hz   Continous Output (@ 25°C)   12.5 amps AC   5 Sec Rating Surge Capability   3500 watts   1 mSec Surge Capability   41 amps AC   100 mSec Surge Capability   29 amps aC   Automatic Transfer Relay   30 amps   DC Input Voltage (nominal)   25.2 VDC   DC Input Voltage Range   21.6-31 VDC   DC Current at Rated Power   80 amps DC   Short circuit current   280 amps DC   Idle Consumption (typical at full voltage)   <9 watts   Search Mode Consumption   < 1 watt   Low Battery Protection (enabled)   22 VDC   Maximum Charge Rate (adjustable)   35 amps DC   Waveform   Modified Sine Wave   Load Sensing (inverter mode)   Adjustable 5 to over 100 watts   General Specifications   Specified Temperature Range   32 °F to 104 °F (0 °C to 40 °C)   Enclosure Type   Indoor, ventilated, steel chassis with powder coat finish   Unit Weight   35 lb (16 kg)   Shipping   39 lb (18 kg)   Dimensions (H x W x D)   8.5 x 22 x 7.25" (21.6 x 55.9 x 18.4 cm)   Shipping Dimensions (H x W x D)   13 x 25 x 12" (33 x 63.5 x 18.4 cm)   Mounting   Horizontal wall mount   Warranty   2 years   Part Numbers   DR1524       DRI - optional, stacking interface cable       DRCB - optional, conduit box       RC8 - optional, remote       BTS - optional, battery temperature sensor   Features & Options   Forced Air Cooling   Standard forced air variable speed fan   Charging Profiles   Eight standard with two equalize profiles   Three-stage Charging   Standard three-stage (bulk, absorption, and float)   Series Stacking Operation   Standard for 120 VAC 60 Hz units only - Requires two units   Battery Temperature Sensor   BTS - optional remote battery temperature sensor for increased battery performance   Remote Control   RC8 - optional remote control and status indicator   Stacking Interface   DRI - optional stacking interface cable for 120/240 VAC 60 Hz applications   Conduit Box   DRCB - optional side mount conduit box for code-compliant DC wiring connections   Regulatory Approvals   ETL Listed to UL 1741 and CSA 22.2 No 107.1 Standards Place a Bid!